Functional Refractories Products for Aluminum Smelting and Refining
Pipes: Al heating sleeve, Lift tube, Heat exchange pipe, thermal
The products (Al heating sleeve, lift tube, heat exchange pipe, and thermal couple protecting sleeve), characterized with long service life, high refractoriness, good resistance to molten Aluminum erosion and corrosion, no contamination to molten Aluminum, etc, are mainly used in Aluminum smelting, refining and Aluminum alloy roll casting system.
Silicon Nitride Bonded Silicon Carbide Port Bricks
The bricks, characterized with high refractoriness, good resistance to molten aluminum erosion and corrosion, no contamination to molten aluminum (or aluminum alloy), good thermal shock resistance, etc., are mainly used in the casting process of aluminum (or aluminum alloy), smelting and refining.
Purging Plugs for Aluminum Refining
By introducing purging plus into Aluminum refining operation, good hydrogen and impurity exclusion effect can be achieved. Hydrogen content of molten Aluminum decreases from 0.35ml/100gAl to 0.15ml/100gAl below, so that the porosity of the final product decreases significantly, and the quality of the Aluminum product is improved. Meanwhile, purging plug makes the temperature and composition of molten Aluminum uniformed, refining time shortened, heat efficiency enhanced, slag reduced and labor intensity eased.
The purging plug developed by LIRR does not react with the chemically active molten Aluminum due to the good chemical stability. The large wetting angle between purging plug and molten Aluminum makes the molten Aluminum infiltration difficult. In addition, the plugs both have good gas permeability and molten metal infiltration resistance because of the special design of gas channel.